Specifications, Trademark acknowledgements, Unpacking – Harbor Freight Tools 67139 User Manual
Page 7
SKU 67139
For technical questions, please call 1-800-444-3353.
Page 7
speciFicatiOns
Video Standard NTSC/PAL
Video
4-Input Channels/1-Output
Channel
Audio
1-Input Channel/1-Output
Channel
Preview
Resolution
NTSC:
20x480@30fps
(each CH)
PAL:
720x576@25fps
(each CH)
Features
Full-DI, 1-Channel/4-
Channel/1-Channel
Playback
Recording
Resolution
NTSC: 720x240@
60fps (Total)
PAL:
720x288@50fps
(Total)
Features
Variable Frame
Rate, up to 200 hrs,
recording time
Quality
4 Levels
Hard drive
250 gigabite hard drive
Audio
ADPCM2 CODEC
Video
MPEG4 Compression
Motion
Detection
Selectable Area and Sensitivity
Detection
Microprocessor 32-bit RISC Processor
Network
Interface
RJ45
HDD Port
Support SATA Hard drive
USB Port
USB 2.0
Audio Port
Optional
Remote
Control
Support IR Remote Control
Adapter
Input: 120 V ~ / 60 Hz
Output: 12 VDC, 5A
Included
Accessories
4 Infrared Day/Night Cameras
(Two 3.6mm wide angle and
two 6mm for longer range, all
are color in daylight and black
& white infrared night viewing),
Camera Cables, Remote
Control, USB Cable, Cable
Splitter, Power Cord, Power
Adapter, Software CD, Two AAA
Batteries,
nOtice: Camera surveillance may be
prohibited by laws that vary from
state to state. Check laws in your
area before using for surveillance.
This device complies with part 15 of
the FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference that
may cause undesired operation.
To the extent that you use this unit
with software other than what is provided,
we will not be responsible for any loss or
damage to your computer or contents.
trademark acknowledgements
Ethernet, Internet Explorer (IE), Ac-
tiveX, DivX, and Windows XP, Windows
Vista are registered trademarks of the
respective holders.
unpacking
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
rev 10h