Network setup – Harbor Freight Tools 67139 User Manual

Page 15

SKU 67139

For technical questions, please call 1-800-444-3353.

Page 15

netwOrk setup

The 67139 allows you to view your

DVR through the Internet. This is

especially useful for remote security

monitoring.
Set up the unit using a TV monitor so

you can view the Main Menu during

set up. You will not need the TV moni-

tor once the set up is complete.

what you will need to set up the

dvr Online

You will need:

The DVR connected to a router.

•

The router connected to the Inter-

•

net.

A PC or laptop that is connected to

•

the same router as the DVR.

A compatible web browser (instruc-

•

tions were developed with a com-

mon web browser , other brows-

ers may not be compatible).

A genuine and fully updated version

•

of Windows XP or Vista.

note: The computer and DVR need to be

connected to the same router. The

computer is required at the location

to view the DVR for initial set up, but

is not needed for remote access once

the unit is set up and working prop-

erly.

connecting Your dvr to the

router

Power off the DVR by removing the

power cable from the back of the

DVR.

Connect the network cable (sold

separately) to the back of the DVR in

the Ethernet port.
Connect the other end of the network

cable to an available port on the

router. The port should be labeled 1-4

or 1-8.
Power on the DVR by reconnecting

the power cable on the back of the

DVR.
A green light should light up on the

back of the DVR at the Ethernet con-

nection and also at the port on the

router.

Finding your dvr’s internal ip

address

By default, the DVR IP mode is set to

Static. Changing the Static to DHCP,

will cause the DVR to automatically

retrieve an IP address from the con-

nected router. Unless your network

requires a static IP address, leave the

DVR IP Allocation set as DHCP.
To retrieve the address information:

Press Menu.

Move the cursor next to Network

Setup and press Select.

rev 10h