Harbor Freight Tools 67139 - Manual (Page 20)

SKU 67139 For technical questions, please call 1-800-444-3353. Page 20
videO QualitY
main menu
CAMERA SETUP
RECORD SETUP
RECORD FRAMERATE
VIDEO qUALITY HIGH
RECORD SCHEDULE
SENSOR SETUP
HARD DRIVE SETUP
MISCELLANEOUS SETUP
NETWORK SETUP
LANGUAGE ENGLISH
RESET MENU
( )MOVE ( SEL)SELECT (MENU)ESC
Video Quality can be set to Highest,
High, Normal, and Low. The higher
settings produce better images, but
use up more hard drive space. The
cameras are all set to the same set-
ting in one step in the Main Menu.
In the Main Menu, use the arrow keys
to select Video Quality. Press the
[SEL] button to change between the
four video quality settings.
recOrd schedule
record schedule
am pm
0… 3… 6… 9… 0… 3…. 6… 9…
NO-RECORD
NORMAL-RECORD
SENSOR -RECORD
( )MOVE (SEL)SELECT ( MENU) EXIT
S
The Record Schedule sub-menu al-
lows you to customize the recording
time for the cameras. The cameras
are all set to the same schedule.
The time line shows a 24 hour period,
based on AM/PM (0=12).
In the Record Schedule sub-menu,
1.
press the arrow keys [ , , and
] to move the marker to the de-
sired time.
Press [SEL] to modify the recording
2.
mode. The Mode options are:
NO-RECORD (white) - The DVR will a.
not record during this period.
NORMAL RECORD (red) - The DVR
b.
will record continuously during this
period.
SENSOR RECORD (S) - The DVR
c.
will begin recording when the motion
sensor is activated.
Press [MENU] to exit the Record 3.
Schedule sub-menu once the record-
ing options have been set.
note: Once all the menu options are set,
press the REC button to activate
the Record Schedule.
sensOr setup
sensOr setup
SENSORED RECORD TIME 30
ALARM ON TIME 0 5
MOTION DETECTOR SETUP
( )MOVE ( SEL)SELECT (MENU)ESC
The Sensor Setup sub-menu sets
how long (in seconds) the cameras
will record once the sensor is activat-
ed, and whether or not, and how long
(in seconds), the alarm will sound.