beautypg.com

Harbor Freight Tools 67139 User Manual

Page 16

background image

SKU 67139

For technical questions, please call 1-800-444-3353.

Page 16

Check that the “IP Allocation” is set

c.

to DHCP.
Write down your IP address, sub-

d.

net Mask, Gateway and HTTP Port

(default is 80). This information will

be used in the next few steps to view

the DVR on your computer and the

Internet.
Go to the User Setup menu and

e.

write down the admin ID and admin

password. The default is “admin”

and “111111”.

note: If your router does not support

DHCP, contact your network admin-

istrator to supply you with your IP

information. If the DVR needs to store

PPPoE (DSL/ADSL) settings, contact

your ISP (Internet Service Provider)

for the proper settings.

preparing Your computer for

viewing the dvr

installing software

The Software CD includes a PC view-

er program for the DVR (DxClient

2.7.1). This program is for backing up

video files and remote access. You

may also need to change the security

settings of the web browser.
to install the pc viewer program:

Insert Software CD into your com-

1.

puter’s CD-ROM drive.
Open the CD directory.

2.

Double click on “DxClient 2.7.1-

3.

ENG”.
Run the “Install” program.

4.

Follow the setup wizard to finish the

installation.

adding dvr to trusted sites

Every computer that is accessing

the DVR will need to be configured

to download and run ActiveX con-

trols. This is a one time change and

only needs to be made on the com-

puter that is accessing the DVR. This

can be done by changing your web

browser settings so it only affects

websites that you specifically add

to the trusted sites list. Or you can

change the setting for all websites.

It is recommended that you only

change the setting for your trusted

sites.

cautiOn: Lowering the safety settings of

your computer can open your com-

puter up to viruses. Do this at your

own risk.
To add the DVR’s IP address to the

Trusted Sites on a common web

browser:
Open your web browser.

1.

Click on TOOLS.

2.

Click on INTERNET OPTIONS.

3.

Click on SECURITY Tab.

4.

Click on TRUSTED SITES.

5.

Click on SITES button.

6.

rev 10h