Quickspecs – HP XW4300 User Manual
Page 24
Monitor system health to fix problems before they occur
Install drivers and BIOS updates without visiting each PC
Remotely configure BIOS and security settings
Automate processes to quickly resolve hardware problems
Additional Altiris solutions (fee-based) are available to address Workstation management challenges
through the entire IT lifecycle including:
Inventory assessment
Software license compliance
Personality migration
Software image deployment
Software distribution
Asset management
Client backup and recovery
Problem resolution
and to evaluate the Altiris solutions.
System Software Manager
(free)
A free utility that detects and updates BIOS, device drivers, and management agent versions on your
networked PCs and workstations
Replicated Setup
Saves BIOS settings to diskette or USB disk-on-key in human readable file. Repset.exe utility can then
replicate these settings on machines being deployed without entering ROM-based F10 setup
Software Restore CD
Restores computer to its original factory shipping image
Asset Tag
Repository for storing company-specific property asset numbers for easy tracking
Initially set equal to the system serial number
Stored in a protected section of non-volatile memory that can be accessed and modified with the
F10 Setup program
DIMM Serial Presence
Detect
Detects whether or not memory DIMMs are present and their type
Hard drive serial number,
model, and manufacturer
Hard drive manufacturer, model, and serial number is stored in the hard drive firmware and reported in
ROM-based F10 setup
System serial number,
model, & manufacturer
System serial number, model, & manufacturer stored in a non-volatile memory and can be retrieved with
management SW or viewed in ROM-based F10 setup
ROM revision levels
Identifies system ROM revision levels and reports in ROM-based F10 setup
Version is stored in an industry standard memory location (SMBIOS) so that management SW applications
can use and report this information
System board revision level
Allows management SW to read revision level of the system board
Revision level is digitally encoded into the HW and cannot be modified
Memory Change Alert
(Requires HP Client
Manager Software)
Alerts management console if memory is removed or changed
Ownership Tag
A user-defined string stored in non-volatile memory that is displayed in the BIOS splash screen
Ultra ATA Integrity
Monitoring
(CRC Checking)
A feature of SATA and SCSI, Cyclic Redundancy Checking provides data transfer verification and proactive
notification of hard drive data transmission problems with recommendations for enhancing system
performance. It detects all the following errors' types:
single-bit errors
double-bit errors
an odd number of errors
error bursts up to 32-bits long
QuickSpecs
HP xw4300 Workstation
Technical Specifications
DA - 12260 Worldwide — Version 23 — May 25, 2007
Page 24