beautypg.com

HP 79XXY User Manual

Page 18

background image

14

hp pavilion home pc

Filename: ma1rwtc.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc.
Revision #: 161 Page: 14 of 46 Printed: 04/26/01 09:20 AM

To reassemble the computer:

1 Replace the side panel (see “Replacing the

Side Panel” on page 23).

2 Reconnect the power cord and all other

cables.

3 Reconnect the modem/phone cable.

4 Turn on the computer and all peripherals.

5 Install any software drivers supplied by the

card manufacturer.

What Is Plug and Play?

“Plug and Play” describes the ability to add and
remove add-in cards, memory, and peripherals
without any special procedures (such as resetting
jumpers and testing for system conflicts). The
system BIOS (basic input/output system) finds
these components and adds them to the system.
You do not have to run the BIOS setup program.

If the New Card or Device Isn’t
Working

Read through the card manufacturer’s installation
instructions, and recheck all connections,
including those to the card, power supply,
keyboard, and monitor. If the problem still exists,
run the BIOS setup program and load the default
settings, and then save and exit.

This manual is related to the following products: