Quickspecs, Hp proliant bl460c server blade standard features – HP ProLiant Blade BL460c User Manual
Page 5
Cache Memory
2 x 6 MB shared L2 cache (5400 Sequence)
1 x 6 MB L2 cache (5200 Sequence)
2 x 4 MB Level 2 cache memory (5300 Sequence
1 x 4 MB Level 2 cache memory (5100 Sequence)
Chipset
Intel® 5000P Chipset
Memory
Type
PC2-5300 Fully Buffered DIMMs at 667 MHz
Standard
1 GB (2 x 512 MB)
2 GB (2 x 1 GB)
Maximum
64 GB (8 x 8 GB)
NOTE: Memory must be installed in pairs.
NOTE: 64GB of Memory is supported with 80W processors and below.
Not supported with 120W processors.
Network Controller
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for
Microsoft Windows
One (1) additional 10/100 NIC dedicated to iLO 2 Management
NOTE: The Gigabit Ethernet adapters transmit from the server only at 2000 Mbps, full duplex per
port. However, within a Linux environment, the speed can be reduced or "throttled" using a feature
available within the Linux operating system; see the white paper at:
for more information.
The 10 Gigabit KX-4 NC512m adapter transmits from the server only at 20 Gbps (20,000 Mbps),
full duplex.
Once the adapter signal reaches the interconnect within the blade enclosure and communicates
outside the blade enclosure to the LAN, the blade interconnect uplink types and settings
determine the cable media, speed, duplex mode, and auto negotiation mode. Interconnects are
available with Ethernet uplinks supporting 10/100/1000T, 10/100/1000 SFP, 1000 SX fiber, and
10Gb KX-4.
QuickSpecs
HP ProLiant BL460c Server Blade
Standard Features
DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008
Page 5