HP ProLiant Blade BL460c - Manual (Page 18)

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order server blades must start with a CTO Blade.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models HP ProLiant BL460c Driveless CTO Blade 447707-B21
Configurable Model ships with:
Two (2) embedded NC373i Multifunction Gigabit Server Adapters plus one (1)
additional 10/100 NIC dedicated to iLO 2 Management
Integrated Lights-Out 2 Standard Blade Edition
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted):
Processors For single processor configuration choose:
Quad-Core Processor Option Kits
Quad-Core Intel® Xeon® processor X5460 (3.16 GHz, 1333 FSB, 120 W)
Option Kit, FIO Base 459973-L21
Quad-Core Intel® Xeon® processor X5450 (3.00 GHz, 1333 FSB, 120 W)
Option Kit, FIO Base 463056-L21
Quad-Core Intel® Xeon® processor E5450 (3.00 GHz, 1333 FSB, 80 W) Option
Kit, FIO Base 459489-L21
Quad-Core Intel® Xeon® processor E5440 (2.83 GHz, 1333 FSB, 80 W) Option
Kit, FIO Base 459490-L21
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 1333 FSB, 80 W) Option
Kit, FIO Base 459491-L21
Quad-Core Intel® Xeon® Processor E5420 (2.50 GHz, 1333 FSB, 80 W) Option
Kit, FIO Base 459492-L21
Quad-Core Intel® Xeon® Processor L5420 (2.50 GHz, 1333 FSB, 50 W, LV)
Option Kit, FIO Base 462876-L21
Quad-Core Intel® Xeon® processor E5410 (2.33 GHz, 1333 FSB) Option Kit,
FIO Base 459493-L21
Quad-Core Intel® Xeon® Processor L5410 (2.33 GHz, 1333 FSB, 50 W LV),
Option Kit, FIO Base 462877-L21
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 1333 FSB, 80 W) Option
Kit, FIO Base 459494-L21
Quad-Core Intel® Xeon® processor X5365 (3.00 GHz,1333 FSB, 120 W) Option
Kit, FIO Base 453190-L21
Quad-Core Intel® Xeon® processor X5355 (2.66 GHz, 1333 FSB, 120 W).
Option Kit, FIO Base 435565-L21
Quad-Core Intel® Xeon® processor E5345 (2.33 GHz, 1333 FSB, 80 W) Option
Kit, FIO Base 435564-L21
Quad-Core Intel® Xeon® processor E5335 (2.00 GHz, 1333 FSB, 80 W) Option
Kit, FIO Base 443753-L21
QuickSpecs
HP ProLiant BL460c Server Blade
Configuration Information - Factory Integrated Models
DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008 Page 18