HP SL6000 - Manual (Page 24)

24
Appendix: PPIC command line utility
HP provides a simple command line utility, called PPIC, for reading and configuring the power control
logic of the SL product line. Running the PPIC utility from the command line without any command-line
options will provide the options shown below.
HP ProLiant Power Interface Control Utility v.1.09
Copyright (c) 2003, 2009 Hewlett-Packard Development Company, L.P.
Usage: POW [Options]
options:
-d Display and Log Power Status and Configuration
-v verbose data displayed
-s Set Power Configuration Mode
-m
00= No Redundancy Mode (Power Throttling
Disabled)
01= AC Redundancy with Throttling Mode (Max
Performance w/
Redundancy)
02= Full AC/DC Redundancy Mode
03= User Configurable Mode (LO100 Advanced
License
Required)
-l (in Watts - Required for
-c Calibrate and Display Power Limits
-p Poll and Log Power Readings
-v verbose data logged
-f (in secs)
-t (in secs)
-o override output log filename
(default log filename= ppic.log)