Heat & Glo Fireplace HEAT & GLO Escape-42DV - Manual (Page 51)

Heat & Glo • Escape-42DV • 2052-900 Rev. Y • 11/11 51
LOG #6
(SRV2052-086):
Place log #6 on the left side of the
grate with the groove on the end of
the log fi tting into the vertical left
grate tine. The other end sits on
the fl at spot of log #3.
LOG #7
(SRV2012-087):
Place log #7 on top of log #6. The
groove in the front side of the log
fi ts into the second vertical tine
from the left of the grate. The
center of the log rests in the fl at
spot on log #6.
LOG #8
(SRV2012-088):
Place Log #8 on top of Log #5.
The fl at bottom of Log #8 sits on
the large fl at area of Log #5. The
burned end of Log #8 rests on the
second vertical tine from the right
of the grate. The tine fi ts on the
burned out groove on the left end
of the log.
Final Step:
Place MYSTIC EMBERS gener-
ously around on the fl oor of the
fi replace. Do NOT put Mystic em-
bers on the burner surface around
the ports. Place embers around
the pilot wires to disguise the wires
from view.
6
6
7
5
8
3
2052-945B