HP ProLiant ML330 - Manual (Page 32)

System Unit Dimensions (HxWxD)
(with feet) 16.8 x 7.5 x 20.25 in (41.91 x 19.05 x 51.44 cm)
Weight 40 lb (18.18 kg)
Input Requirements
(per power supply) Range Input Voltage 100 to 199 VAC/200 to 240 VAC
Normal Line Voltage 115 to 230 VAC
Line Frequency 50 to 60 Hz
Rated Input Current <6A 100VAC to 199VAC
<3A 200VAC to 240VAC
BTU Rating 1,560 BTU
SCSI Connectors One internal HD68 connectors
NOTE: Support for either one internal, or one external is available.
Internal cabling is included with the server. External SCSI cabling from
the integrated SCSI controller is achieved using an internal to external
SCSI cable option kit (PN 159547-B22 or 333370-B21).
Power Supply Output
Power
(per power supply) Rated Steady-State
Power 300W
Maximum Peak Power 400W
Temperature Range Operating 50° to 93° F (10° to 35° C)
Shipping -40° to 150° F (-40° to 66° C)
Relative Humidity
(non-condensing) Operating 20% to 80%
Non-operating 5% to 90%
Acoustic Noise Idle
(Fixed Disk Drives
Spinning)
L WAd (BELS) 5.1
L pAm (dBA) 34
Operating
(Random Seeks to Fixed
Disks)
L WAd (BELS) 5.5
L pAm (dBA) 38
48X Max IDE
CD-ROM Drive Disk Applicable Disk CD-ROM (modes 1 and 2); mixed mode
(audio and data combined)
CD-DA
Photo CD (Single- and Multi-session)
CD-XA (mode 2, forms 1 and 2)
CDI ready ; CD-WO
Capacity 650 MB
Block Size Mode 1 2,048 bytes, 1024 bytes
Mode 2 2,340 bytes, 2,336 bytes, 1024 bytes
CD-DA 2,352 bytes
CD-XA 2,328 bytes
Interface IDE (ATAPI)
Access Times (typical) Random <100 ms
Full-Stroke <150 ms
Audio Output Level Line-Out 0.7 VRMS at 47 kOhms
QuickSpecs
HP ProLiant ML330 Generation 3
Technical Specifications
DA - 11614 Worldwide QuickSpecs — Version 44 — 6.28.2005 Page 32