Connecting to a preexisting network – HP WHR-HP-AG108 User Manual

Page 58

Text mode
Original mode

Connecting to a Preexisting Network

Add an AirStation without changing your existing LAN configuration

1. Set the AirStation into Bridge/AP Mode by moving the switch on the bottom from

AUTO to BRI.

2. Connect one of the AirStation’s LAN ports to an existing router or switch on your

network. Connect a PC to another LAN port for configuration. Nothing should be

plugged into the WAN port.

3. Open LAN Settings - LAN Port Settings and configure the following settings:
IP Address =[192.168.11.1] (Specify an unused network address from the existing

LAN.)

Subnet Mask=[255.255.255.0] (Use the same Subnet Mask as the existing LAN.)
DHCP Server Function=[Disable]
4. The PC used for configuration will need to be restarted before continuing configuration.