HP WHR-HP-AG108 - Manual (Page 41)

1
The SSID or network name can be changed
by entering a custom SSID and pressing
the Apply button.
Be careful changing the settings
under “Advanced Settings”. It’s safe
to experiment with different SuperAG
settings, but don’t change the other
advanced settings unless you have a
reason to do so.
SuperAG technology uses channel bonding
to maximize data throughput. The
enhanced performance is only available to
computer or wireless devices that have a
compatible SuperA or SuperG card, like the Buffalo High Power Dual A + G Wireless USB
2.0 Adapter. SuperAG mode allows wireless network speeds up to 108* Mbps. Use with
compression is recommended to use SuperAG on A band. To use SuperAG on G band,
see page 43.
802.11a (Basic)