HP iPAQ hx4700 - Manual (Page 100)

Using Wi-Fi
User’s Guide 8–2
Powering Wi-Fi On or Off
To use Wi-Fi on your HP iPAQ, you need to turn on Wi-Fi and set
up your device.
Note: The Wi-Fi antenna for the HP iPAQ is located in the top of
the unit. If you cover up the top of the HP iPAQ after you have
turned on Wi-Fi, signal strength may be affected.
To turn the Wi-Fi on or off:
1. From the Today screen, tap the iPAQ Wireless icon ( ) in
the Command bar located at the bottom of the screen.
2. Tap the Wi-Fi button.
When Wi-Fi is powered on, the Wi-Fi icon on the iPAQ
Wireless screen turns from gray to amber to green and the
Wi-Fi light-emitting diode (LED), located on the top left
corner of the unit, is solid blue indicating Wi-Fi and/or
Bluetooth are on.