B power cord, C front-panel overlay with text on it, D one black and one color print cartridge – HP Color Copier User Manual

Page 10

2-2

Setting Up Your New HP Color Copier

Verify that the following items are included with your HP Color Copier:

Power supply (AC/DC adapter) with attached cord
(HP part number 0950-2880)

Power cord

Front-panel overlay with text on it

One black and one color print cartridge

If any of the items are missing or damaged, contact the dealer from whom
you purchased your HP Color Copier.

Choose a location and environment for your HP Color Copier.

◆

Use your HP Color Copier only within normal office temperature
and humidity ranges. For recommended ranges, see “Environmental
Specifications” in Chapter 8.

◆

Avoid direct sunlight or locations where a quick change in
temperature might cause condensation inside the unit.

◆

Make sure the location is well ventilated. Dust, gases, or fumes
(such as ammonia or paint thinner) can damage the unit.

◆

Choose a site that is level, flat, and stable. The HP Color Copier
vibrates and needs to be on a sturdy surface.

◆

Be sure a grounded outlet is nearby and easily accessible.

◆

If your unit has an automatic document feeder (ADF), make sure
that you can open the lid all the way by placing your HP Color
Copier at least 9 inches (230 mm) from the wall.

WSGCh1.fm Page 2 Wednesday, December 23, 1998 12:25 PM