Hasselblad H1D - Manual (Page 98)

98 99 Hasselblad H1D Hasselblad H1D
key clockwise 90˚ to lock the film holder in place and fold the
key back into its stored position. You might find that increased
pressure on the left hand side of the film holder will more easily
ensure a positive and correct positioning in the magazine.
6) If the camera is active or in standby mode the film will be wound
automatically by the camera to position the first frame (this
function can be changed in ‘Custom options’ so that the film is
advanced only when the shutter release button is pressed the
first time).
Film wind off
When the last frame has been exposed, the film will automatically
be wound off. However, to wind off a film sooner, press the film wind
off button (on the camera). Use a ballpoint pen or similar to activate
it. You must also confirm the message on the grip LCD before the
film rewinds.
Unloading a film
To remove a film, remove the film holder in the same manner as
when loading a film. Grip the exposed roll of film firmly and remove.
Ensure the paper backing is wound tightly and that it is sealed with
the band properly (the band may need to be moistened to activate the
adhesive depending on type). Store exposed films away from strong
light sources and contact with sharp objects. Move the remaining
empty spool to the take-up spool compartment.