HP 441877-00B - Manual (Page 23)

Installation 23
100 Mbps full-duplex
1000 Mbps full-duplex
o
Flow Control
Disabled (default)
Auto Negotiation (Symmetric Pause advertised)
Receive Pause
Transmit Pause
Receive & Transmit Pause
o
MAC Address
No Override (default) - a user-administered MAC address entered with a colon separating each
hexadecimal byte (for example, 12:34:56:78:9a:bc).
o
Jumbo MTU Size
1500–9000 (default is 1500)
For more detailed information, at the command prompt, enter:
man bcme
NOTE:
1000 Mbps (1 Gbps) full-duplex fixed speed is only valid for fiber connections. For
copper, twisted-pair connections, 1 Gbps can only be set through auto-negotiation with a 1
Gbps partner.
NOTE: Auto-negotiation of Flow Control is only valid when the Line Speed is set to
AutoNegotiate.
Solaris
The following describes the Solaris driver for HP 10/100/1000 Mbps Network Server Adapters. The
driver is released in two formats:
•
BRCMbcme.pkg: Datastream format
•
bcmedu.img: Driver Update (DU) binary image which is used to create DU diskette.
Installing the driver
1. Change directory to where BRCMbcme.pkg resides.
2. pkgadd -d BRCMbcme.pkg
3. Execute prtconf to determine instance number of the adapter.
4. ifconfig bcme [instance_number] plumb
5. ifconfig bcme [instance_number] ip_address netmask ....
To make these changes permanent:
1. Use your favorite text editor (for example, VI), and create a file named
hostname.bcme[instance_number] in /etc directory. Add the IP address of the interface to this file,
save and exit.
2. Add a proper subnet mask to the file /etc/netmasks.