Epson Windows-Based Terminal BOSSTX2 CE 5.0 - Manual (Page 72)

67
5.Click “OK” to process Test procedure and the WBT will notify user that “the test data has been sent to the printer”.
6.Checking the printer then user can find the default characters printed as below.
LPD for CE .NET 4.0 version 1.0
==========================================================
EPSON Stylus Photo 1270(shows the printer model name as user setup)
The quick brown fox jump over the lazy dog.
7.After the Test procedure completely, please click “OK” to save the settings.
The WBT will automatic reboot to make the LPD service available.
And the message will appear on the screen and then click OK.
8.If the test is fail, the WBT will notify user to check the printer device.
Then user has to repeat the printer device setting in section 6.5.14.1
BOSSTX2 CE 5.0 User's Manual