Epson Windows-Based Terminal BOSSTX2 CE 5.0 - Manual (Page 17)

12
3.2.1.2 Specify a static IP address
If the method you selected on the prior screen was to enter a static IP address, the below screen will appear. You will be
required to enter the following information onto the screen.
IP address
Required for identifying this unit to the network. The format will follow the standard addressing format.
Subnet Mask
Required for designating which network the IP address is a part of.
Gateway
Optional address which identifies the machine through which a subnet communicates with another network.
Specify an IP Address
3.2.2 Enable/Disable Name Resolution Services
The screen shown below will appear only if you choose the Static IP Addressing method. The DHCP method will provide this
information required using a name resolution service.
Terminal servers typically support both DNS (Domain Naming Service) and WINS (Windows Internet Naming Service) name
resolution services. This screen allows the terminal unit to use one or both of these resolution services. To enable DNS,
WINS, or both, check the corresponding box. In the text boxes, enter the following information as appropriate for each. Click
Next.
Optional Information
BOSSTX2 CE 5.0 User's Manual