Edirol R-09 - Manual (Page 35)

35
Recording
5.
Set the type of microphone being used.
Set the [EXTERNAL MICROPHONE TYPE Switch] to the type of microphone connected
to the [MIC Input Jack].
• When connecting a dynamic microphone or a battery-powered microphone, be sure to use the
• If a cable is connected to the [LINE IN Jack], then no sound is input through the [MIC Input Jack].
Dynamic microphone
The durable dynamic microphone is suitable for vocal or instrumental recordings. It does not
require a power supply.
Condenser microphone
The sensitive condenser microphone is suitable for recording quiet sounds such as live instrumentals
or meetings. It requires a power supply from either batteries or plug-in power.
Only the L channel is recorded when a monaural microphone is used with the external microphone
type switch set to stereo microphone. When monaural microphone settings are used, the L and R
channels record the same sound (stereo).
6.
Connect the microphone.
Connect a microphone to the [MIC Input Jack] on the R-09.
To monitor the sound while recording, connect headphones to the [HEADPHONE jack]. Feedback
may occur when external speakers are connected, so please do not use speakers.
7.
Adjust the input level.
Adjust the volume for the recorded sound.
Follow the procedures in “Adjusting recording levels” (p. 37) to adjust the level.
Dynamic microphone
Use the
Condenser microphone powered
by self-contained battery
Plug-in powered condenser mi-
crophone
Use the
Stereo Set to stereo with the [EXTERNAL MICROPHONE TYPE Switch] (p. 9).
Monaural Set to monaural with the [EXTERNAL MICROPHONE TYPE Switch] (p. 9).
R-09_e.book 35 ページ ２００７年２月１３日 火曜日 午後３時２７分