Epson GT-7000 - Manual (Page 29)

1
Setting Up the Scanner 1-15
PapU-U
Rev. C
A5 size CHAP1.FM
2/1/00 Pass 0
R Proof Sign-off:
E.Omori
_______
_______
_______
Setting the terminator switch
The scanner has a built-in terminator, which allows SCSI devices
to communicate properly with each other. You may need to
change the terminator switch setting according to your computer
system.
Note:
Do not use an external terminator.
ON
The terminator switch is located
at the rear of the scanner.
Only the scanner is connected
terminator on