Epson GT-7000 - Manual (Page 22)

1-8 Setting Up the Scanner
PapU-U
Rev. C
A5 size CHAP1.FM
2/1/00 Pass 0
L Proof Sign-off:
E.Omori
_______
_______
_______
Releasing the Transportation Lock
Before connecting the scanner to a power source, you must release
the transportation lock.
1. Place the scanner on a flat, stable surface with the back facing
you.
2. Turn the transportation lock on the right side to the unlocked
position using a coin or similar object, as shown below.
Note:
❏ When you cannot turn the transportation lock because of excessive
resistance, turn the scanner on, then, after the operate light starts
flashing red, turn the scanner off, and try again. See the next section
to turn on the scanner.
❏ Return the transportation lock to the locked position when
transporting the scanner.