Plugging in the scanner, Plugging in the scanner -9, Papu-u rev. c – Epson GT-7000 User Manual
Page 23
1
Setting Up the Scanner
1-9
PapU-U
Rev. C
A5 size
CHAP1.FM
2/1/00
Pass 0
R
Proof Sign-off:
E.Omori
_______
_______
_______
Plugging in the Scanner
1. Make sure that the scanner is turned off. The scanner is off
when the
P operate
button is not pushed in beyond the
surface of the front panel.
2. If the power cord is not attached to the scanner, connect it to
the AC inlet on the back of the scanner, and plug the other
end into a properly grounded electrical outlet.
c
Caution:
It is not possible to change the scanner's voltage. If the label on
the back of the scanner does not show the correct voltage for your
country, contact your dealer. Do not plug in the power cord.
This manual is related to the following products: