Eclipse - Fujitsu Ten CD5423 - Manual (Page 79)

79
How to operate the receiver with an optional DSP/EQ unit connected
Selecting an equalizer mode from memory
Press a preset button to select the equalizer mode set in
memory for the button.
The buttons that set equalizer modes in memory are called
preset buttons.
Press the button, [1] to [6] for less than two seconds
while in the EQ mode.
Press the [RTN] button.
At this time, other adjustments can also be made in Sound
Adjustment Mode.
Press the [SOUND] button to exit Sound Adjustment
Mode. 3
2
1
[SOUND] button Buttons [1] to [6]
[RTN] button