Switching the remote control settings, Press the [func] button of the main unit, Turn [sel] button to select a pattern – Eclipse - Fujitsu Ten CD5423 User Manual
Page 67: Turn [sel] button to select remote, Press the [sel] button, Press the [rtn] button, Press the [func] button to exit function mode
67
How to use an optional NOB remote control
DISC
BAND
MODE
MUTE
ILLUMI
PWR
E-COM
TRACK
TUNE SEEK
PU
SH-MOD
E
[SEL] button
[FUNC] button [RTN] button
[
DISC
] buttons
[
TRACK
] buttons
Switching the remote control settings
Press the [FUNC] button of the main unit.
1
Turn [SEL] button to select a pattern.
4
Remote control functions can be switched to the three patterns.
PATTERN A: Conventional functions
PATTERN B: [DISC
] button ................Repeat
[DISC
] button ................Answer
[TRACK
] button.............Next
[TRACK
] button.............Previous
Other functions than the above are conventional functions.
PATTERN C: [DISC
] button ...............Option4
[DISC
] button ...............Option3
[TRACK
] button ............Option2
[TRACK
] button ............Option1
Other functions than the above are conventional functions.
The pattern is switched in the order of A, B, and C so that the
E-com function can be supported.
Turn [SEL] button to select REMOTE.
2
The remote control function switching mode is activated.
Press the [SEL] button.
3
Press the [RTN] button.
5
Press the [FUNC] button to exit Function Mode.
6
At this time, other adjustments can also be made in Function
Mode.