Emerson Radio iE600BK - Manual (Page 5)

4
PREPARATION FOR USE
Unpacking and Set-up
• The display carton contains the main unit, the remote control handset, six (6)
different iPod ® adapters, and the external FM wire antenna (attached to the
bottom of the main unit). Remove all of the components from the carton and
make sure that nothing is accidentally discarded with the packing materials.
We recommend that, if possible, you save the carton and packing materials in
the event that your unit ever needs to be returned for service. Using the original
carton and packing materials is the only way to prevent your unit from damage
during shipment.
• Remove all packing materials from the main unit and the accessories.
• Remove any descriptive labels from the front or top panels of your unit. Do not
remove any labels from the back or bottom panels.
• Remove any small strips of tape that may have been used to secure the CD
door and the secondary control cover door during shipment.
• Press on the right front corner of the CD door to release the lock and open the
door. Remove the dummy CD transit protection card from the CD mechanism
and discard it.
• Remove the “paper dummy iPod ® ” from the docking area and discard it. That
is for store display purpose only.
• Unwind the AC power cord and extend it to its full length.
• Place the main unit on a stable, level surface such as a table, stand, or shelf,
convenient to an AC outlet, out of direct sunlight, and away from sources of
excess heat, dust, moisture, vibration, and strong magnetic fields.
iE600_050407.p65 4/5/2007, 11:50 4