Emerson Radio iE600BK - Manual (Page 24)

23
Listening To The Radio
1.) Press the Radio/Band button to select the Radio function. The power turns
‘On’ automatically and the display back lighting and edge lighting also turn on.
The first time you press the Radio/Band button the display will show:
“FM 87.5 MHz STEREO”.
Press again to change to the FM MONO
mode.
Press once more to select the AM band.
The first time you select the AM band
the display will show “AM 520 KHz”.
Repeatedly pressing the Radio/Band button changes the band from
FM STERO, to FM MONO, to AM.
2.) After selecting the desired band, tune to the desired station by either the
Automatic or Manual Tuning methods as follows:
• Manual Tuning
Repeatedly press the TUN + or TUN – buttons until the frequency of the desired
station appears on the display.
• Automatic Tuning
Depress and hold either the TUN + or TUN – buttons until the display begins to
move, then release the buttons. The tuner will search up or down the band for
the next strong station and stop on that station. Repeat this procedure until the
tuner stops on the desired station.
iE600_050407.p65 4/5/2007, 11:50 23