Emerson Radio iE600BK User Manual

Page 36

1.) Select the proper insert for your particular iPod

model from the “Chart” and

place the insert in the docking area as shown.

If you are using one of the 30GB or 60GB (5G) iPod

s with video capability, or

the (2G) iPod

nano use the inserts that were included with the iPod

s when

you bought them.

2.) Set the HOLD switch of your iPod

to the “Off” position to unlock the click-

wheel navigation controls.

3.) Place your iPod

into the insert in the

docking area and make sure that it is

fully seated on the connector.

4.) Press the iPod/Shuffle button on the top cabinet of this system, or on the

remote control, to turn the Power on.

NOTE: It is not necessary to press the

Power button first.

5.) The display will show either the “iPod”

or “iPodShuffle” indicators.

Press the iPod/Shuffle button Until the display is showing “iPod”.

NOTE: The display indicator must match the type iPod

you are using

or no sound will be heard.

iE600_050407.p65

4/5/2007, 11:50

This manual is related to the following products: