Epson 850N - Manual (Page 157)

Using Floppy Diskettes
A-8
Installing the Printer Software
(Driver) in Windows
Follow these steps to install your printer software:
1. Insert diskette 1 in your drive.
2. In Windows 95 or NT 4.0, click Start , then click Run .
In Windows 3.1x, select Run from the File menu in
Program Manager.
3. Click OK and follow the instructions on the screen to
install your printer software.
Your printer is automatically set to your local port, LPT1.
You need to change it to follow the network path to your
printer by adding a port as described on pages 27 and 29 of
your Setup Guide.
Installing the Printer Software
(Driver) in Macintosh
Follow these steps to install your printer software:
1. Turn on your printer and your Macintosh and turn off any
virus protection programs you may have.
2. Insert the diskette in your drive and double-click the
diskette icon that appears.
3. Double-click the Installer icon.
4. Follow the instructions on the screen and restart your
computer.
To use the printer, you need to select the EPSON Stylus
COLOR 850 AT printer in the Chooser and make sure
AppleTalk is on.
Note:
For instructions on using
your printer software, see
Chapter 1 in this
User’s
Guide.
basket-a.fm Page 8 Wednesday, May 13, 1998 4:09 PM