Epson 850N - Manual (Page 108)

Using the Ethernet Card
6-6
Installing the DLC Protocol
Make sure Windows NT is running, and follow these steps to
install DLC:
1. Open the Control Panel.
2. Double-click the Network icon.
3. Click the Protocols tab and then click Add .
4. Select DLC Protocol from the Select Network Protocol list,
and click OK .
5. Follow the instructions on the screen and reboot your
system.
Configuring the Ethernet Card
After you have installed the DLC protocol, follow these steps to
configure the card and your printer for Window NT 4.0:
1. Double-click My Computer , then double-click the
Printers icon.
2. Double-click the Add Printer icon.
3. Select My Computer , then click Next.
4. Click Add Port .
5. Select whatever DLC network port setting you have on
your system, then click New Port.
If necessary, insert your Windows NT CD-ROM or
diskette so Windows can copy the files.
6. Type a name for the port in the Name box. Make sure the
name is not the same as an existing port, such as LPT1.
Note:
To verify that the DLC
protocol is installed
correctly, check the list
of installed Network
Software in the
Network dialog box.
basket-6.fm Page 6 Wednesday, May 13, 1998 4:37 PM