Epson 850N - Manual (Page 118)

Using the Ethernet Card
6-16
For example, if you want to set up the EPSON Stylus
COLOR 850N (with an Ethernet card name of Printer and
redirected from local printer lp) as PRINTRA, which prints
ASCII files with carriage returns, type the following:
:lp : rm = Printer : rp = lpa : sd = /var/spool/PRINTRA:
3. Repeat steps 1 and 2 for each remote printer option (a
different one for each lpr filter) you want to add. Use a new
remote printer name and local printer name for each.
Printing with Standard UNIX Systems
Once you have set up the printer, you can use either lpr or ftp
to send a print file from any workstation.
The EPSON Stylus COLOR 850N can handle many separate
communications channels simultaneously. However, unless it is
combined with a compatible spooling unit, the printer does not
have any disk-spooling capability. Print jobs received while the
printer is processing a job are stacked and printed in rotation.
The printer responds to a print query by sending back
information on the status of the current print job and any
stacked jobs. If it receives the query when all available
connections are in use, it does not respond.
Using Ftp to Print
By default, ftp uses binary file transfer. If you want to include
carriage returns at the end of lines, change to ASCII file transfer
by typing
ascii on the command line. To change back to binary
file transfer, type binary on the command line.
You can also append a form feed to the end of a print job by
naming the destination file
FEED or feed .
Note:
Because lpr may strip
control characters, you
may prefer to print using
ftp.
basket-6.fm Page 16 Wednesday, May 13, 1998 4:37 PM