Epson 850N - Manual (Page 127)

Using the Ethernet Card
6-25
3. From the Installation Options screen, select Product
Options and press Enter .
4. From the Other Installation Items/Products list, select
Configure Network Protocols and press Enter .
5. From the Internetworking Configuration list, select
Protocols and press Enter .
6. From the Protocol Configuration list, select IPX and press
Enter .
7. In the IPX Protocol Configuration dialog box, make sure
the Routing Protocol is set to RIP/SAP Only . If it is not,
select NLSP with RIP/SAP Compatibility and press
Enter , then select RIP/SAP Only and press Enter .
Installing EPSON Net! for DOS
If you have Novell NetWare, you can install EPSON Net! on
your DOS computer. Insert the EPSON Stylus COLOR 850N
CD-ROM in your drive and use the DOS COPY command
(
COPY D:\FILENAME.* ) to copy the following files to a
network directory or to your hard drive:
D:\EPSONNET\DOS\EPNWDE.EXE
D:\EPSONNET\DOS\EPNWDE.DAT
See your Setup Guide to use EPSON Net! to configure the
printer’s Ethernet card.
Note:
This utility requires a
minimum of 480 KB of
conventional memory.
See Appendix A if you
need to create diskettes
and use them to install
EPSON Net!.
basket-6.fm Page 25 Wednesday, May 13, 1998 4:37 PM