Edirol V-4 - Manual (Page 92)

92
MIDI implementation
● Program Change
Status 2nd byte
----------------------------------------
CnH
ppH
pp= program number:00H - 7FH (prog.1 - prog.128)
*
When you select channel A or channel B inputs, make memory settings, or specify how
sub-channels are mixed in Presentation mode, these messages will be transmitted in
conjunction with Bank Select messages. For details, refer to the section on Bank Select.
● Channel Pressure
Status 2nd byte
----------------------------------------
DnH
vvH
* Just as for Control Changes, the messages assigned in MIDI Setup will be transmitted
when you operate the panel. For the factory settings, refer to “Settings Transmitted/
Received Using MIDI” (p. 95).
● Pitch Bend Change
Status 2nd byte 3rd byte
--------------------------------------------------------------------
EnH
llH mmH
mm, ll= pitch bend value:00 00H - 40 00H - 7F 7FH (-8192 - 0 -+8191)
*
Just as for Control Changes, the messages assigned in MIDI Setup will be transmitted
when you operate the panel. For the factory settings, refer to “Settings Transmitted/
Received Using MIDI” (p. 95).