LG Studio 30 Inch Smart Double Electric Wall Oven Owners Guide User Manual
Page 48
48
MAINTENANCE
CAUTION
• It is normal for parts of the oven to become hot
during a
Self Clean
cycle. Avoid touching the
door, window or oven vent area during a
Self
Clean
cycle.
• Do not leave small children unattended near the
appliance. During the
Self Clean
cycle, the
outside of the oven can become very hot to the
touch.
• If you have pet birds, move them to another
well-ventilated room. The health of some birds is
extremely sensitive to the fumes given off during
the
Self Clean
cycle of any oven.
• Do not line the oven walls, racks, bottom or any
other part of the oven with aluminum foil or any
other material. Doing so will destroy heat
distribution, produce poor baking results and
cause permanent damage to the oven interior
(aluminum foil will melt to the interior surface of
the oven).
• Do not force the door open. This can damage the
automatic door locking system. Use care when
opening the oven door after the
Self Clean
cycle.
Stand to the side of the oven when opening the
door to allow hot air or steam to escape. The
oven may still be VERY HOT.
NOTE
• The oven light cannot be turned on during a
Self
Clean
cycle. The oven light cannot be turned on
until the oven temperature has cooled below
500
ૢ
(260
) after a
Self Clean
cycle is
complete.
• Clean the frame of the oven and door with hot
soapy water. Rinse well.
• Do not clean the gasket. The fiberglass material
of the oven door gasket cannot withstand
abrasion. It is essential for the gasket to remain
intact. If you notice it becoming worn or frayed,
replace it.
• It is normal for the fan to operate during the
Self
Clean
cycle.
• As the oven heats, you may hear sounds of metal
parts expanding and contracting. This is normal
and will not damage the oven.
• You may notice some white ash in the oven.
Wipe it off with a damp cloth or a soap-filled
steel wool pad after the oven cools. If the oven is
not clean after one
Self Clean
cycle, repeat the
cycle.
• If oven racks were left in the oven and do not
slide smoothly after a
Self Clean
cycle, wipe
racks and rack supports with a small amount of
vegetable oil to make them glide more easily.
• After a
Self Clean
cycle, fine lines may appear in
the porcelain because it went through heating
and cooling. This is normal and will not affect
performance.
• The
Self Clean
cycle cannot be started if the
Lock Out
feature is active.
• Once the
Self Clean
cycle is set, the oven door
locks automatically. You will not be able to open
the oven door until the oven is cooled. The lock
releases automatically.
• Once the door has been locked, the lock
k
indicator light stops flashing and remains on.
Allow about 15 seconds for the oven door lock to
activate.
• If the clock is set for a 12-hour display (default)
the Delayed
Self Clean
can never be set to start
more than 12 hours in advance.
• After the oven is turned off, the convection fan
keeps operating until the oven has cooled down.
When to Use Self Clean
• Example of oven soiling
Case 1
• Soil pattern: Medium to heavy splatter
• Types of soils: Fat/grease
• Common food items that can soil your oven:
Meat roasted at high temperatures
Case 2
• Soil pattern: Drops or spots
• Types of soils: Filling or sugar based soils
• Common food items that can soil your oven: Pies
Case 3
• Soil pattern: Drops or spots
• Types of soils: Cream or tomato sauce
• Common food items that can soil your oven:
Casseroles
UUGGwG[_GGm SGq GYZSGYWYXGGZaY^Gwt