LG Studio 36 Inch Induction Cooktop Owners Guide - Manual (Page 20)

20 OPERATION
To Set the Element Power Level
Select the number on the element power settings
for the active cooking zone to adjust the power
level from 1 to 9.
If you've set 17 power levels in the Settings menu,
press the dots between the numbers to adjust the
power level up or down half a step.
Hot Surface Indicator
• If this icon is displayed on the screen, be careful
because the ceramic glass surface is hot.
- Failure to do so may result in burns or injuries.
• After turning off the burner, the icon is displayed
continuously until the ceramic glass surface
cools down.
- If the temperature near the product is high, it
may take longer for the ceramic glass surface
to cool down.
• Even after the indicator light has turned off, be
careful since the surface may still be hot.
Getting Started
The first time that power is supplied to the
cooktop, the LG Studio logo is displayed for 1
second. After turning on the cooktop for the first
time, adjust the settings to suit your preferences.
To operate the control panel, press the pad firmly
with the flat part of your fingertip.
1
Press POWER on the LCD display.
2
After the startup animation, select the desired
language and press
NEXT .
3
Set the correct time of day and choose
between a 12-hour or 24-hour time format.
(The 12-hour format is not available in
French.) Then press
NEXT .
4
Read through the application guide in the
display and press
DONE .
5
The Main screen appears in the display.
Changing Cooktop Settings
Settings
To adjust settings after the initial setup, press the
display to open the main screen. Press
SETTINGS
at the bottom center of the main screen. Swipe the
d
SETTINGS : Press to adjust settings. For a list
of configurable settings, see "Operating
Instructions".
e
Kitchen Timer : Press to set a kitchen timer.
For details, see "Operating Instructions".
f
Cooktop Control : To check the status of a
cooking zone and adjust the cooking zone.
For details, see "Operating Instructions".
Hot surface indicator
Surface elements and controls
us_main.book.book Page 20 Friday, August 19, 2022 2:09 PM