Samsung 30 Inch Freestanding Electric Smart Range Owner Manual - Manual (Page 65)

English 65
Tr
ouble
shoo
ting
Information codes
OVEN
Displayed
Code
Possible cause Solution
C-d0
There is a short in the control
key.
Press OFF/CLEAR , and then
restart the oven. If the problem
persists, disconnect all power
to the range for at least 30
seconds and then reconnect the
power. If this does not solve the
problem, call for service.
C-d1 The door lock is misaligned.
C-F0
This code occurs if
communication between
the Main and Sub PBA is
interrupted.
C-F2
This code occurs if
communication between the
Main and Touch is interrupted.
C-20
The oven sensor is open when
the oven is operating.
Press OFF/CLEAR , and then
restart the oven. If the problem
persists, disconnect all power
to the range for at least 30
seconds and then reconnect the
power. If this does not solve the
problem, call for service.
There is a short in the Oven
sensor.
C-21
This code occurs if the internal
temperature rises abnormally
high.
C-30
The main PCB sensor is open
when the oven is operating.
There is a short in the main PCB
sensor.
Displayed
Code
Possible cause Solution
C-31
This code occurs if the PCB
temperature rises abnormally
high.
Call for service.
-dC- This code appears if the divider
is inserted or removed while the
oven is operating. Make sure the divider is
inserted properly, and then
restart the oven.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power. If
this does not solve the problem,
call for service.
bAd LinE
This error message appears
if the power cord is installed
improperly.
If the power connection is
plugged in improperly, “bAd
LinE” appears on the display.
Reconnect the power connection
properly, and the message
disappears.