Critical installation warnings, Important safety instructions – Samsung 30 Inch Freestanding Electric Smart Range Owner Manual User Manual
Page 14
14 English
Impor
tant saf
ety ins
truc
tions
Important safety instructions
Important safety instructions
SAVE THESE INSTRUCTIONS
GLASS/CERAMIC COOKING SURFACES
•
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS.
Surface units may be hot even though they are dark in color.
Areas near surface units may become hot enough to cause
burns. During and after use, do not touch, let clothing, or
other flammable materials contact the surface units or areas
near the units until they have had sufficient time to cool.
Among these areas are the cooktop and the facing of the
cooktop.
•
Do not cook on a broken cooktop.
If the cooktop should
break, cleaning solutions and spillovers may penetrate the
broken cooktop and create a risk of electric shock. Contact a
qualified technician immediately.
Clean the cooktop with caution.
If a wet sponge or cloth is used
to wipe spills on a hot cooking area, be careful to avoid steam
burns. Some cleaners can produce noxious fumes if applied to a
hot surface.
CRITICAL INSTALLATION WARNINGS
WARNING
•
This appliance must be installed by a qualified technician or
service company.
- Failing to have a qualified technician install the range
may result in electric shock, fire, an explosion, problems
with the product, or injury.
•
Unpack the oven, remove all packaging material and
examine the oven for any damage, such as dents on the
interior or exterior of the oven, broken door latches, cracks
in the door, or a door that is not lined up correctly. If there
is any damage, do not operate the oven and notify your
dealer immediately.
•
Plug the power cord into a properly grounded outlet with
the proper configuration. Your oven should be the only item
connected to this circuit.
•
Keep all packaging materials out of the reach of children.
Children may use them for play and injure themselves.
•
Install your appliance on a hard, level floor that can support
its weight.
- Failing to do so may result in abnormal vibrations, noise,
or problems with the product.