EverFocus EPTZ3100 - Manual (Page 69)

69
c. BAUDRATE: shows baud rate of this speed dome
d. RS-485-ID: shows RS-485 ID of this speed dome
e. PRESET-CNT: Preset counter. This counter counts the preset movement, and 1 is
counted when the speed dome runs to preset position.
f. X-CONT: X-axis counter. This counter counts the x axis movement, and 1 is counted
when the speed dome pans 360°.
g. Y-CONT: Y-axis counter. This counter counts the y axis movement, and 1 is counted
when the speed dome tilts 180°.
h. Press IRIS+ key to return to previous menu.
3.10. EXIT
Exit from the current menu.