beautypg.com

EverFocus EPTZ3100 User Manual

Page 23

background image

23

3. Connect the cable you detached from base board to the RS485 cable, Power cable and

video cable you thread from the wall or ceiling. RS485 cable has to be connected via a

terminal block. If you need to connect alarm cable, thread the alarm cable through the

second hole. Note: Since video cable and power cable are bare wires, installers have to

prepare their own BNC connector and power cord connector.

4. Screw in 4 screws for mounting the bracket base.

Video cable

Power cable

RS485 cable

Alarm cable

This manual is related to the following products: