beautypg.com

EverFocus EPTZ3100 User Manual

Page 26

background image

26

Pull open this switch

2. Apply the adhesive stripe at back of desiccant pack to the inner side of the top housing.

There are totally 3 desiccant packs to be applied.

3. When all the desiccant packs are pasted and alarm cables are connected properly, put

the base board back to its original place, you will need to pull open the switch in order to

have the base board fitted to the top housing.

Note:

To close the base board, please push the base board twice consequently to lock it up.

This manual is related to the following products: