EverFocus EPTZ3100 - Manual (Page 62)

62
PATTERN: When the alarm is triggered, speed dome will run the pattern. Turn the
joystick Left/Right to select on Pattern and press Enter key to select pattern number.
Turn joystick Left/Right to make selection. It is selectable from1~4. Press Enter key
again to confirm selection.
TOUR: When the alarm is triggered, speed dome will run the tour. Turn the joystick
Left or Right to select on Tour and press Enter key to select tour number. Turn joystick
Left or Right to make selection. It is selectable from1~16. Press Enter key again to
confirm selection.
d. DURATION: Duration of alarm input.
TIMEOUT: Turn the joystick Left or Right to select on TIMEOUT and press Enter key
to select time-out. Time-out is selectable from 1~99. Press Enter key again to confirm
selection.
LATCHED: Turn the joystick Left or Right to select on LATCHED. The alarm output
will not stop until there is any operation on keyboard .
TRANSPARENT: Turn the joystick Left or Right to select on TRANSPARENT. The
alarm output will not stop until the alarm is stopped.
e. PRIORITY: Turn the joystick Left or Right to select alarm input priority, it is selectable
from 1234/2341/3412/4123.
f. RETURN: Turn joystick Left/Right to return to previous menu.