Pit Boss 45 Inch Portable Gas Grill Owners Guide - Manual (Page 11)

ENGLISH
11
GAS CYLINDER REQUIREMENTS
The grill is set and tested with liquid propane gas only. Use a standard 1-lb. propane cylinder, with dimensions of 8” (20.32 cm)
high, 3.88”(9.85 cm) diameter. Contact your gas supplier for a special regulator for bulk gas that fuels other appliances.
WARNING: Using larger cylinders could cause the unit to tip over, resulting in injuries.
INSTALLING A GAS CYLINDER
Take the protective cap off the regulator valve and place it on
top as shown in the diagram. Place the gas cylinder under the
regulator and tighten cylinder.
DISCONNECTING A GAS CYLINDER
IMPORTANT: When changing or disconnecting a gas
cylinder, care must be taken to keep away from any
source of ignition.
Unscrew the gas cylinder to remove from the grill regulator.
Put the protective cap when the grill is not in use.
CONNECTING TO A GAS SUPPLY