Installation steps – Hestan 30 Inch Drawer Microwave Installation Manual User Manual

Page 13

INSTALLATION STEPS

(CONT.)

Figure 10. Screws and mounting flange

TESTING OPERATION

Turn power ON to the Drawer Microwave.

2. Set the clock according to the instructions in the Use and Care (U&C) Manual.
3. Place a microwave-safe container with a cup of water in the unit and close the drawer.
4. Touch START/ADD MINUTE.
5. The microwave's fan should run and its light should come on.
6. When it shuts off, the water should be warm or hot.
Refer to the U&C Manual for full operating procedures.

CLEANING AND MAINTENANCE

Refer to the U&C Manual for cleaning instructions.

BEFORE YOU CALL FOR SERVICE

Read the BEFORE YOU CALL and operating instruction sections in your U&C Manual. It may save

you time and expense. The list includes common occurrences that are not the result of defective

workmanship or materials in this microwave product.
Refer to the warranty in your U&C Manual for Hestan’s service number and address. Please call or

write if you have inquiries about your microwave product and/or need to order parts.

Mounting

flange

Screws (4)

4 Screws

Parts supplied