Hestan 30 Inch Drawer Microwave Installation Manual - Manual (Page 10)

CLEARANCES AND DIMENSIONS
(CONT.)
Figure 5. Flush mount, top view
Note: the mounting surface of the finished cleat must sit 1 1/16" [26.97 mm] back from the face of
the cabinet (pushing the face of the drawer out 1/4" [6.35 mm].)
Key Dimension
A. 28-1/2" [723.9 mm] mounting cleat opening width
B. 1/4" [6.35 mm]
C. 1-1/16" [26.97 mm]
Figure 6. Flush mount, front view
Key Dimension
A. 28-7/16" [722.3 mm] mounting cleat opening width
B. 30-5/16" [769.92 mm] minimum, 30-5/8" [777.87 mm] maximum flush opening width
C. 3/4" [19.05 mm] shelf
A
B C
Anti-Tip block
Mounting cleat
Drawer face
Cabinet
face
TOP VIEW
CL
Oven not
shown
C
B
A
Suggested electrical
outlet location Anti-Tip block
FRONT VIEW
©2019 Hestan Commercial Corporation
8
EN