Elation Professional 15R User Manual

Page 20

fixture channel and test it’s function independently from the control

board.

Lamp adjustment (manual control) – This function readies the fixture for lamp

optimization in a simple single step procedure. This function will center the pan and tilt

motors and at the same time open the shutter and bring the dimmer to 100%. The pan

and tilt function will still operate if the fixture needs to be positioned to a flat clear

surface. For more information on lamp optimization please see Section 6/Page 14.

Calibrate values – This function should only be performed by a qualified technician.

This function allows a user to make small adjustments to the effect wheels (color, gobo,

shutter, etc) to compensate for ware or in the event a sensor has been knocked slightly

out of place. Because improper use of this function can result in undesired operation this

function has been password protected. The password is 050 and must be entered each

time the calibration menu function is entered. Because calibration is an extremely

delicate procedure instruction on performing this action are left out of this manual. For a

first time calibrator, please contact our customer support team for step-by-step

instructions.

User Mode Set:

User mode – This function allows the user to create user defined channel orders

allowing the fixture to match the channel order of other fixtures on the market for easier

operation. A total of three user modes may be configured: User Mode A, User Mode B,

and User Mode C.

Edit User mode – This function allows the user to make the actual changes in the user-

defined modes that are created in the previous function.

EDIT PROGRAM: - The fixture comes equipped with a built-in DMX recorder that allows

custom programs to be installed and recalled directly from the fixture’s control board.

Programs can be created and stored using the fixture’s control board or by using an

external DMX controller. For detailed instructions on how to complete this task please

see Section 12/ Page 39.

- - XM542-V1.0-NR