Emerson Radio PD6559 - Manual (Page 28)

2 7
Resetting The System Computer
This system is equipped with a special circuit designed to protect the internal
computer from permanent damage due to unexpected power surges.
If you find that the system does not respond to any commands from the unit controls
or the remote handset, the system probably experienced a sudden power surge
that activated the protection circuit.
To reset the system after a power surge use the point of a pencil, a toothpick, a
straightened paper-clip or similar object to press the RESET button which is located
in a small opening on the bottom of unit.
The system will return to the Standby (Power Off) mode.
NOTE: Resetting the system computer also clears all of the system memory
and returns the system to its original factory default settings. All of the preset
memories will be erased after you press the RESET button.
It will be necessary to re-enter the stations in the tuner preset memories.
RESET Button
PD6559.60_B102306.p65 23/10/2006, 10:14 27