Emerson Radio PD6559 - Manual (Page 13)

1 2
Listening To The Radio
1.) Press the POWER button. The display turns ‘On’.
2.) If necessary, press the “FUNCTION” button to select the Tuner function.
The display will show an AM or FM station
frequency.
To select a different band, press the STOP/
BAND button again.
3.) Tune to the desired frequency as follows:
• Manual Tuning
Repeatedly press the TUNING or buttons until the frequency of the
desired station appears on the display.
• Automatic Tuning
Press and hold the TUNING or buttons until the display begins to move,
then release the buttons. The tuner will search up or down the band for the
next strong station and stop on that station. Repeat this procedure until the
tuner stops on your desired station.
4.) Adjust the VOLUME and X-BASS controls as desired.
5.) If you tuned to an FM Stereo station the
indicator will appear in the display.
6.) When you are finished listening, press the POWER button. The display goes
‘Off’.
PD6559.60_B102306.p65 23/10/2006, 10:14 12