Emerson Radio PD6559 - Manual (Page 16)

1 5
5.) Press the MEM. UP button on the top panel or
remote control to select the next preset memory
channel. Example: “P 2”.
Press the MEMORY button on top panel or
PROG./MEMORY button on the remote control
to enter the desired station in preset memory
channel “P 2”.
6.) Repeat steps 4 and 5, selecting a different preset memory channel number
each time, until you have entered up to 10 FM stations in the tuner memory.
7.) Press the STOP/BAND button to select the AM band and follow the same
procedure to enter up to 10 AM stations in the tuner memory.
Auto-Preset Function
This model includes an Auto-Preset feature which you can use to automatically
enter 10 strong FM and AM stations in the tuner preset memory.
NOTE: This feature is useful if you live in a rural area with a limited
number of stations. However if you live in a major metropolitan area
with many strong stations, do not use the Auto-Preset feature. It will
memorize the first 10 strong stations it encounters and these will probably
not be the same 10 stations that you would select if you were memorizing
stations manually.
To use the Auto-Preset feature, turn the unit 'On', select the Tuner function and the
desired band.
Depress and hold the the MEMORY button on main unit, or PROG./MEMORY
button on the remote control until the tuner display begins to move, then release
the button.
The tuner will start searching up the band and it will automatically enter the first 10
strong stations on the selected band in the 10 preset memories. The display will
indicate which station is being entered in each of the 10 memories.
After the Auto-Preset feature memorizes 10 stations, the tuner returns to preset
memory number “P 1”.
PD6559.60_B102306.p65 23/10/2006, 10:14 15