Emerson Radio PD6559 - Manual (Page 19)

1 8
If the disc is inserted upside down or if the disc is badly scratched and
unreadable, playback will not be possible.
In this case the display will show “– –”. Remove
the disc and re insert it properly, or try another
disc.
6.) Press the PLAY/PAUSE button to begin playback.
Track number “0 1” appears in the display and
the Play indicator comes ‘On’.
Adjust the VOLUME and X-BASS controls as desired.
7.) Playback will continue until the last track has played then the disc stops and
the Play indicator goes ‘Off’, and the display will again show the total number
of tracks on the disc.
To stop playback before the disc ends press the STOP/BAND button.
8.) If you are finished listening open the CD door and remove your disc.
9.) To listen to the Radio or Cassette Tape, press the “FUNCTION” button as
desired, or press the POWER button to turn the power ‘Off’.
Pause Control
To pause momentarily during CD playback press the PLAY/PAUSE button on
the top panel again.
The sound stops and the Play indicator flashes
but the disc continues to spin.
Press the PLAY/PAUSE button again to cancel the Pause mode and resume
normal playback.
The sound resumes at the same point on the disc and the Play indicator stops
flashing.
PD6559.60_B102306.p65 23/10/2006, 10:14 18