Emerson Radio PD6559 - Manual (Page 23)

2 2
6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
When the memory is full, the “– –” indicator
flashes in the display.
7.) To begin programmed playback press the PLAY/PAUSE button.
The display will show the first programmed track and playback will begin on
that track.
The MEMORY indicator remains ‘On’.
• After the last programmed track has played the player stops but the programmed
tracks remain in the memory.
• To play the programmed tracks again, press the PROGRAM button on front
panel or PROG./MEMORY button on the remote control and then the PLAY/
PAUSE button.
• To cancel the programmed sequence from memory, press the STOP/BAND
button at programming mode, or open the CD door.
Programmed Repeat Playback
You can use the Program and Repeat features together to continuously repeat a
programmed sequence of tracks.
1.) First, program the desired tracks according to Steps 1 through 6 on the previous
page.
2.) When Programmed Playback begins press the PLAY MODE button on front
panel or P-MODE/MEM. UP button on remote control twice to activate the All
Tracks Repeat feature.
3.) The REPEAT indicator appears in display and all
the tracks in your programmed sequence will be
repeated continuously.
To cancel Programmed Repeat Playback press the STOP/BAND button until
both the MEMORY and REPEAT indicators disappear.
PD6559.60_B102306.p65 23/10/2006, 10:14 22